LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Equinox LS, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Control Bracket Replacement >> Installation Procedure

Installation Procedure

  1. Position the transmission control bracket in the vehicle.
  2. GM4573590Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Install the automatic transmission control nuts (2) to the automatic transmission control bracket (3) and tighten to 9 N.m (80 lb/in).

  3. Install the left instrument panel center support bracket bolt (1) and tighten to 22 N.m (16 lb-ft).
  4. GM4573596Courtesy of GENERAL MOTORS COMPANY

    Install the right instrument panel center support bracket bolt (1) and tighten to 22 N.m (16 lb-ft).

  5. Transmission control - Install - Transmission Control Replacement