LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Equinox LS, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Input Speed Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the control solenoid valve and transmission control module assembly. Refer to Control Solenoid Valve and Transmission Control Module Assembly Replacement .
  2. GM1998829Courtesy of GENERAL MOTORS COMPANY

    Disconnect the input speed sensor electrical connector (1).

  3. GM1998841Courtesy of GENERAL MOTORS COMPANY

    Remove the input speed sensor bolt (2) M6 x 23.

  4. Remove the input speed sensor (3).
  5. Remove the 3 input speed sensor seals (1).
scientia non olet · About LEMON Manuals