Installation Procedure
- Front Fender (3) - Install
- Headlamp Bolt (2) - Install - Front Headlamp Replacement (Chevrolet) .
- Front Fender Bolt (1) - Install and tighten [ 2x ] 9 N.m (80 lb/in)
Headlamp Bolt (1) - Install - Front Headlamp Replacement (Chevrolet) .
- Front Fender Bolt (2) - Install and tighten [ 2x ] 9 N.m (80 lb/in)
Front Fender Nut (1) - Install and tighten 9 N.m (80 lb/in)
- Front Fender Bolt (2) - Install and tighten [ 2x ] 9 N.m (80 lb/in)
Front Fender Bolt (1) - Install and tighten [ 2x ] 9 N.m (80 lb/in)
- Front Fender Bolt (2) - Install and tighten 9 N.m (80 lb/in)
Front Fender Upper Rear Molding (1) - Install - Front Fender Upper Rear Molding Replacement
Front Bumper Fascia (1) - Install - Front Bumper Fascia Removal and Installation (Equinox)
- Install the appropriate front wheelhouse liner:
- Install the appropriate front fender insulator. Front Fender Insulator Replacement (Left Side Equinox) , or Front Fender Insulator Replacement (Right Side Equinox)
Rocker Panel Molding (1) - Install - Rocker Panel Molding Replacement (Equinox)
Air Inlet Grille Panel (1) - Install - Air Inlet Grille Panel Replacement
CAUTION:
Refer to Fastener Caution .