Removal Procedure
Instrument Panel Center Trim Plate Applique (1, 2) - Remove - Instrument Panel Center Trim Plate Applique Replacement (Terrain)
Instrument Panel Trim Pad - Right Side (1) - Remove - Instrument Panel Trim Pad Replacement - Right Side (Terrain)
Radio Control Bolt (1) - Remove [ 7X ]
- NOTE:
The Instrument Panel Radio Front And Rear Trim Plate, Heater And Air Conditioning User Interface Control And Instrument Panel Center Air Outlets Comes Off As One Unit.
Radio Control Assembly (1) - Remove
- Use A Plastic Trim Tool If Necessary.
- Disconnect The Electrical Connectors.
Radio Control Bolt (1) - Remove [ 7X ]
Instrument Panel Radio Front Trim Plate (1) - Remove
- Transfer Components As Necessary.