Installation Procedure
Instrument Panel Radio Front Trim Plate (2) - Install
- Instrument Panel Upper Compartment Bolt (1) - Install And Tighten [ 4X ] 1 N.m (9 lb/in)
Radio Control Bracket (2) - Install
- Radio Control Bracket Bolt (1) - Install And Tighten [ 4X ] 2.5 N.m (22 lb/in)
Connect The Electrical Connectors.
- Radio Control Assembly (1) - Install
Radio Control Bracket Bolt (1) - Install And Tighten [ 2X ] 2.5 N.m (22 lb/in)
Heater And Air Conditioning User Interface Control (1) - Install - Heater And Air Conditioning User Interface Control Replacement (Equinox)
Instrument Panel Trim Pad - Right Side (2) - Install - Instrument Panel Trim Pad Replacement - Right Side (Equinox)
Instrument Panel Cluster Trim Plate (1) - Install - Instrument Panel Cluster Trim Plate Replacement (Equinox)
CAUTION:
Refer To Fastener Caution .