LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Equinox LS, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Instrument Panel And Console Trim >> Repair Instructions >> Instrument Panel Knee Bolster Replacement (Equinox) >> Removal Procedure

Removal Procedure

  1. GM4562240Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster Bolt (1) - Remove [ 3X ]

  2. Push Down On Hood Handle (2) To Release, Then Slide Out Of The Knee Bolster.
  3. GM4562241Courtesy of GENERAL MOTORS COMPANY

    Instrument Panel Knee Bolster (1) - Remove

  4. Use A Flat Bladed Plastic Trim Tool.
  5. Disconnect The Electrical Connector.
  6. Transfer Components As Necessary.
scientia non olet · About LEMON Manuals