LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Equinox LS, 4WD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 6T40 (MNH MNK) Or 6T45 (MHG) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Mount Replacement - Left Side >> Installation Procedure

Installation Procedure

  1. GM4846061Courtesy of GENERAL MOTORS COMPANY

    Install the left transmission mount (4) to the vehicle.

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the transmission mount to body bolts (5) and tighten to 100 N.m (74 lb-ft).
    3. CAUTION:

    Refer to Torque-to-Yield Fastener Warning .

  3. Install the NEW left transmission mount to transmission bolt (1) and initially tighten to 35 N.m (26 lb-ft).
  4. Install the NEW left transmission mount to transmission bolt (2) and initially tighten to 35 N.m (26 lb-ft).
  5. Install the NEW left transmission mount to transmission bolt (3) and initially tighten to 35 N.m (26 lb-ft).
  6. Tighten left transmission mount to transmission bolts (1-3) to 100 N.m (74 lb-ft) plus 60 - 75 degrees, using the EN-45059  meter.
  7. Remove the transmission jack.
  8. Install the battery tray. Battery Tray Replacement .
scientia non olet · About LEMON Manuals