Automatic Transmission Fluid Pump Cover Assemble
Automatic Transmission Fluid Pump Cover Assemble
| Callout | Component Name |
|---|---|
| 1 | Automatic Transmission Fluid Pump Seal |
| 2 | Automatic Transmission Fluid Pump Pressure Plate Seal Procedure Install a NEW seal. Do NOT reuse the old seal.
NOTE:
The 1st and 2nd design automatic transmission fluid pump pressure plate seals are not interchangeable. |
| 3 | Automatic Transmission Fluid Pump Gasket Procedure Install NEW gaskets. Do NOT reuse old gaskets. |
| 4 | Automatic Transmission Fluid Pump |
| 5 | Automatic Transmission Fluid Pump Cover Bolt [ 5x ]
CAUTION:
Refer to Fastener Caution . Tighten 10 N.m (89 lb/in) |