Circuit/System Verification
- Ignition - On / Vehicle - In Service Mode
- Verify DTC P0602 is not set.
- If the DTC is set
Program the control module: K71 Transmission Control Module
- Go to next step: If the DTC is not set
- If the DTC is set
- Verify DTC P0601, P0603, P0604, P062F is not set.
- If the DTC is set
Replace the component: Q8 Control Solenoid Valve Assembly
- Go to next step: If the DTC is not set
- If the DTC is set
- All OK.