LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Equinox LS, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 248 (Automatic Transmission - 9T45 (M3U) Or 9T50 (M3D M3H) - Repair Instructions - Off Vehicle) >> Repair Instructions - Off Vehicle >> 2-9 and 4 Clutch Piston Housing Assemble

2-9 and 4 Clutch Piston Housing Assemble

WARNING: This page is about a different car, the 2021 GMC Terrain. However, it is still accessible from the selected car via links, so may be relevant.
GM4381748Courtesy of GENERAL MOTORS COMPANY
Callout Component Name
1 2-9 and 4 Clutch Piston Housing
2 4th Clutch Piston Inner Seal
NOTE:

Install a NEW seal. Do NOT reuse the old seal.

3 4th Clutch Piston Outer Seal
NOTE:

Install a NEW seal. Do NOT reuse the old seal.

4 4th Clutch Piston
5 2-9 Clutch Piston
6 2-9 Clutch Piston Return Spring
7 2 - 9 Clutch Piston Retaining Ring

Procedure

  1. Install - DT-51892  Bridge Kit
  2. Use a press to push down to install retaining ring.
  3. Remove - DT-51892  Bridge Kit

Special Tool 
DT-51892  Bridge Kit
Equivalent regional tools:Special Tools
8 4th Clutch Piston Return Spring
9 4th Clutch Piston Retaining Ring

Procedure

  1. Install - DT-51892  Bridge Kit
  2. Use a press to push down to install retaining ring.
  3. Remove - DT-51892  Bridge Kit

Special Tool 
DT-51892  Bridge Kit
Equivalent regional tools:Special Tools