Fastener Specifications
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Driver or Passenger Seat Adjuster Finish Cover Fastener | 2.5 N.m (22 lb/in) |
| Driver or Passenger Seat Back Frame Bolt | 45 N.m (33 lb-ft) |
| Driver or Passenger Seat Bolt | 45 N.m (33 lb-ft) |
| Driver or Passenger Seat Inner Adjuster Front Finish Cover Fastener | 2.5 N.m (22 lb/in) |
| Front Seat Adjuster Handle Bolt | 5 N.m (44 lb/in) |
| Front Seat Cushion Cover Retainer Bolt | 3 N.m (27 lb/in) |
| Front Seat Cushion Outer Finish Cover Fastener | 2.5 N.m (22 lb/in) |
| Front Seat Vertical Actuator Lever Bolt | 3.5 N.m (31 lb/in) |
| Rear Seat Armrest Bolt | 22 N.m (16 lb-ft) |
| Rear Seat Armrest Bracket Fastener | 8 N.m (71 lb/in) |
| Rear Seat Back Cushion Latch Release Lever Nut | 9 N.m (80 lb/in) |
| Rear Seat Back Cushion Panel Bolt | 55 N.m (41 lb-ft) |
| Rear Seat Back Latch Release Handle Bezel Fastener | 3 N.m (27 lb/in) |
| Rear Seat Back Pivot Bolt | 35 N.m (26 lb-ft) |
| Rear Seat Back Support Bolt | 55 N.m (41 lb-ft) |
| Rear Seat Bolt | 45 N.m (33 lb-ft) |
| Rear Seat Inner Hinge Finish Cover Fastener | 4 N.m (35 lb/in) |
| Rear Seat Latch Bolt | 45 N.m (33 lb-ft) |
| Rear Seat Outer Hinge Finish Cover Fastener | 2.5 N.m (22 lb/in) |
| Rear Seat Recliner Inner Finish Cover Fastener | 4 N.m (35 lb/in) |
| Rear Seat Recliner Outer Finish Cover Fastener | 4 N.m (35 lb/in) |