Fastener Specifications
Single Use Non-Threaded Fasteners/Components
| Application |
|---|
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
| Front Brake Hose Washer |
| Rear Brake Hose Washer |
Reusable Threaded Fastener Tightening Specifications
| Application | Specification |
|---|---|
| Metric (English) | |
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
| Brake Master Cylinder Bolt | 22 N.m (16 lb-ft) |
| Brake Master Cylinder Reservoir Pin | 7 N.m (62 lb/in) |
| Brake Pedal Nut | 22 N.m (16 lb-ft) |
| Brake Pressure Modulator Valve Front Pipe Fitting | 25 N.m (18 lb-ft) |
| Brake Pressure Modulator Valve Rear Pipe Fitting | 25 N.m (18 lb-ft) |
| Front Brake Hose Fitting Bolt | 40 N.m (30 lb-ft) |
| Front Brake Pipe Fitting | 18 N.m (13 lb-ft) |
| Rear Brake Hose Fitting Bolt | 40 N.m (30 lb-ft) |
| Rear Brake Pipe Fitting | 18 N.m (13 lb-ft) |