Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Verify DTC C057F, C0582, C058A, C0590, C0591, C0595, C0596, C1275, C1276, C1277 is not set.
- If the DTC is set
- Perform all necessary programming and setup procedures for the control module: K177 Brake Booster Control Module
- Verify the DTC does not set.
- If the DTC sets - Replace the component: K177 Brake Booster Control Module
- Go to next step: If the DTC is not set
- All OK.
- Go to next step: If the DTC is not set
- All OK.