Brake Pipe and Hose Inspection
WARNING:
Refer to Brake Fluid Irritant Warning .
CAUTION:
Refer to Brake Fluid Effects on Paint and Electrical Components Caution .
- Visually inspect all of the brake pipes for the following conditions:
- Kinks, improper routing, missing or damaged retainers, Leaking fittings, excessive corrosion
- If any of the brake pipes exhibited any of the conditions listed, then the identified pipe, or pipes, require replacement.
- Ensure that the vehicle axles are properly supported at ride height in order to maintain the proper relationship of the flexible brake hoses to the chassis.
Visually inspect all of the flexible brake hoses for the following conditions:
- Kinks (1), improper routing, twists, chafing, missing or damaged retainers
- Leaking connections, cracking, dry-rot, blisters, bulges
- If any of the flexible brake hoses exhibited any of the conditions listed, then the identified flexible brake hose, or hoses require replacement.
- Tightly press the flexible brake hose with fingers to check whether there are any spongy spots (2) (which indicates the existence of interior blocking). Inspect the entire length of each hose.
- If any of the flexible brake hoses were found to have soft spots (2), then the identified flexible brake hose, or hoses require replacement.