Circuit/System Verification
- Ignition - On/Vehicle - In Service Mode
- Perform the scan tool control function: Driver Information Center Segments
Verify the component activates: Driver Information Center Segments - All
- If the component does not w or k as specified
Replace the component: P16 Instrument Cluster
- Go to next step: If the component works as specified
- If the component does not w or k as specified
- Perform the scan tool control function: All Indicators
Verify the component activates: Indicators - All
- If the component does not work as specified
Replace the component: P16 Instrument Cluster
- Go to next step: If the component works as specified
- If the component does not work as specified
- Perform the scan tool control function: Instrument Cluster Dimming
Verify operating the controls yields the expected results.
- If the component does not w or k as specified
Replace the component: P16 Instrument Cluster
- Go to next step: If the component works as specified
- If the component does not w or k as specified
- All OK.