Rear Side Door Adjustment

Procedure

1. Loosen the 4 rear door hinge bolts to adjust the rear door.
2. Adjust the rear door in order to obtain an even gap between the rear door and the body side, the quarter outer panel, the wheelhouse molding, the rocker panel and the front side door.

• Rear side door to bodyside (a) 5.0 mm ± 1.0 mm (0.19 in ± 0.04 in)
• Rear side door to front side door (b) 4.0 mm ± 0.75 mm (0.16 in ± 0.03 in)
• Rear side door to quarter outer panel (c) 4.0 mm ± 0.75 mm (0.16 in ± 0.03 in)
• Rear side door to wheelhouse molding (d) 4.5 mm ± 1.0 mm (0.18 in ± 0.04 in)
• Rear side door to rocker panel (e) 5.5 mm ± 1.5 mm (0.21 in ± 0.06 in)