Hood Primary and Secondary Latch Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Compartment Front Sight Shield Replacement
1	Hood Primary and Secondary Latch Bolt [ 2x ] CAUTION: Fastener Caution Tighten 9 N.m (80 lb/in)
2	Hood Primary and Secondary Latch Procedure Disconnect the release cable from the hood primary latch. Unclip and disconnect the electrical connector.

Callout

Component Name

Hood Primary and Secondary Latch Bolt [ 2x ]

CAUTION:

Tighten
9 N.m (80 lb/in)

Hood Primary and Secondary Latch

Procedure