Hood Replacement

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
1	Hood Hinge Nut [ 4x ] CAUTION: Refer to Fastener Caution . Procedure Mark the hinge to hood position with grease pencil. Tighten 22 N.m (16 lb-ft)
2	Hood WARNING: When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury. Procedure Remove the hood with the aid of an assistant. Transfer components as necessary. Adjust hood as needed. Hood Adjustment

Callout

Component Name

Hood Hinge Nut [ 4x ]

CAUTION:

Refer to Fastener Caution .

Procedure
Mark the hinge to hood position with grease pencil.
Tighten
22 N.m (16 lb-ft)

Hood

WARNING:

When a hood hold open device is being removed or installed, provide alternate support to avoid the possibility of damage to the vehicle or personal injury.

Procedure

Remove the hood with the aid of an assistant.
Transfer components as necessary.
Adjust hood as needed. Hood Adjustment