LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer RS, FWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3D), 9T60 (M3T) Or 9T65 (M3V) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Transmission Rear Mount Bracket Replacement (All Wheel Drive) >> Installation Procedure

Installation Procedure

  1. GM5371754Courtesy of GENERAL MOTORS COMPANY

    Transmission Rear Mount Bracket (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  2. Install and tighten 3 NEW transmission rear mount bracket bolts (1).
    1. First Pass: 100 N.m (74 lb ft)
    2. Final Pass:45-60 degrees 
  3. Transmission Rear Mount - Install - Transmission Rear Mount Replacement (All Wheel Drive) 
scientia non olet · About LEMON Manuals