Conditions for Running the DTC

P0815, P0816

• DTC P0815, P0816, P0826, P1761 = Not set
• Engine Speed = 400 to 7, 500 RPM
• Ignition Voltage = Greater than 9 V
• Time since the last transmission shift = Greater than 1 s

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s

P0826

• DTC P1761 = Not set
• Engine Speed = 400 to 7, 500 RPM
• Ignition Voltage = Greater than 9 V

Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 5 s