Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P0133

HO2S 1 = Not within a calibrated range - For greater than 60 s

P013A

MAF Sensor = Not within a calibrated range & HO2S 2 = 250 to 550 mV

P013B

MAF Sensor = Not within a calibrated range & HO2S 2 = 350 to 650 mV

P013E

MAF Sensor = Not within a calibrated range & HO2S 2 = Greater than 550 mV

P013F

MAF Sensor = Not within a calibrated range & HO2S 2 = Less than 350 mV

P015A, P015B

HO2S 1 = Not within a calibrated range - For greater than 60 s

P2270

MAF Sensor = Not within a calibrated range & HO2S 2 = Less than 800 mV

P2271

MAF Sensor = Not within a calibrated range & HO2S 2 = Greater than 100 mV