LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer RS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 6 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Purge Pump Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Evaporative Emission Hose @ Evaporative Emission Canister Purge Pump - Disconnect - Plastic Collar Quick Connect Fitting Service 
  2. Evaporative Emission Canister Purge Tube @ Evaporative Emission Canister Purge Pump - Disconnect - Plastic Collar Quick Connect Fitting Service 
  3. Remove the engine wiring harness retainers from the evaporative emission canister purge pump and reposition.
  4. GM5065760Courtesy of GENERAL MOTORS COMPANY

    Disconnect the electrical connector.

  5. Remove the evaporative emission canister purge pump bolts (1).
  6. Remove the evaporative emission canister purge pump (2).
scientia non olet · About LEMON Manuals