Conditions for Setting the DTC

WARNING: This page is about a different variant/trim than selected.

P2AB8

Turbocharger Wastegate Position Sensor = Less than 0.25 V - For greater than 1 s

P2AB9

Turbocharger Wastegate Position Sensor = Greater than 4.75 V - For greater than 1 s

P2B81

Turbocharger Wastegate Position Sensor = Internal Malfunction

P2B93

Turbocharger Wastegate Position Sensor = Not Learned

P2C9B

Turbocharger Wastegate Position Sensor = Signal noisy or erratic @ Cold Start-Up - For greater than 5 s

U0644

Serial Data circuit = Message Counter Incorrect/Too Many Pulses/Too Few Pulses - For greater than 1 s