Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P2635
- DTC P018B, P018C, P018D, P0231, P0232, P023F, P0641, P064A, P0606, P1255, P129E, P12A6 = Not set
- Fuel Pump Command = On
- Ignition Voltage - 11 to 32 V
- Engine Run Time - Greater than 30 s
- Fuel Level Sensor - Greater than 10%
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s
P2BB3
- DTC P0231, P0232, P023F, P1255, = Not set
- Fuel Pump Command = On - Greater than 1 s
- Ignition Voltage - 11 to 32 V
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s