LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer RS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Engine Controls And Fuel - 2.0L (LSY) - Diagnostic Information And Procedures (2 Of 2)) >> Diagnostic Information and Procedures >> DTC P111E or P149A-P149E >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different variant/trim than selected.

For an overview of the component/system, refer to: Cooling System Description and Operation (LSY)

Circuit Description
Signal The control module input circuit has an internal resistance connected to 5 V.
Low Reference Grounded through the control module.
Component Description
B34 Engine Coolant Temperature Sensor The sensor is a negative temperature coefficient thermistor. As the temperature of the air, fluid, or metal increases, the resistance of the sensor decreases, varying the voltage on the signal circuit.
K20 Engine Control Module The control module contains a microprocessor used to process input data to control outputs.
The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.