Conditions for Running the DTC

WARNING: This page is about a different variant/trim than selected.

DTC P0010, P0013, P0016, P0017, P0018, P0019, P0335, P0336, P0340, P0341, P0345, P0346, P0365, P0366, P0390, P0391, P2090, P2091 = Not set
Catalyst System = Warm-Up Mode
Desired Camshaft Position = Does not vary greater than 3.0° - For greater than 1 s
Desired Camshaft Position & Camshaft Position = 6 to 30°
Engine = Running
Ignition Voltage = Greater than 11 V

Frequency the DTC runs = Continuously - After the running conditions are met