LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer RS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 11 (Engine Controls And Fuel - 2.5L (LCV) - Diagnostic Information And Procedures (2 Of 2)) >> Diagnostic Information and Procedures >> Alcohol/Contaminants-in-Fuel Diagnosis >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Remove a sample of fuel from the bottom of the fuel tank and place in a clean, clear container.
  2. Place the sample on a level surface for 2 min.
  3. Verify the sample is clear and bright in color.
    • If the sample appears cloudy, or contaminated with water, as indicated by a water layer at the bottom of the sample 

      Refer to Circuit/System Testing - Particulate Contaminants in Fuel.

    • If alcohol contamination is suspected 

      Refer to Circuit/System Testing - Alcohol in Fuel Testing.

    • Go to next step: If the sample remains clear and bright 
  4. All OK.