Conditions for Setting the DTC
WARNING: This page is about a different variant/trim than selected.
P0340, P0365 Condition 1
Camshaft Position Sensor = No Signal - For greater than 5.5 s
Condition 2
Camshaft Position Sensor = No Signal - For greater than 4 s - Starter is engaged.
Condition 3
Camshaft Position Sensor = Less than 4 pulse(s) - For greater than 3 s
Condition 4
Camshaft Position Sensor = No Signal - During the first 2 engine revolutions.
Condition 5
Camshaft Position Sensor = No Signal - During 100 engine revolution(s)
P0341, P0366 Condition 1
Camshaft Position Sensor = Less than 4 pulse(s) - During 2 engine revolution(s)
Condition 2
Camshaft Position Sensor = Greater than 6 pulses - During 2 engine revolution(s)
Condition 3
Camshaft Position Sensor = Less than 398 pulse(s) - Greater than 402 pulses - During 100 engine revolution(s)