Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0335 Condition 1
- DTC P0101, P0102, P0103, P010B, P010C, P010D = Not set
- Engine = Running
- MAF Sensor = Greater than 0.3 g/s
- Starter = Active
Condition 2
- Engine = Running
- Starter = Inactive
Condition 3
- DTC P0365, P0366 = Not set
- Engine = Running or Starter = Active
Frequency the DTC runs = Continuously - After the running conditions are met
P0336 Condition 1
- DTC P0335 = Not set
- MAF Sensor = Greater than 0.3 g/s
- Engine Speed = Greater than 60 RPM
Condition 2
- Engine = Running
- Starter = Inactive
Condition 3
- DTC P0101, P0102, P0103, P010B, P010C, P010D = Not set
- MAF Sensor = Greater than 0.3 g/s
- Starter = Active
Condition 4
- DTC P0365, P0366 = Not set
- Engine = Running or Starter = Active
Frequency the DTC runs = Continuously - After the running conditions are met