Conditions for Running the DTC

P0324 Condition 1

• Engine = Running
• Engine Coolant Temperature = Warmer than -40°C (-40°F)
• Engine Speed = 400 to 8500 RPM
• Mass Air Flow Per Cylinder = 0 to 2000 mg

Condition 2

• Engine = Running
• Intake Air Temperature = Warmer than -40°C (-40°F)
• Engine Speed = Greater than 400 RPM - Cumulative = Greater than 400 engine revolutions
• Mass Air Flow Per Cylinder = 0 to 2000 mg

Frequency the DTC runs = Continuously - After the running conditions are met

P0325, P0330 Condition 1

• Engine = Running
• Engine Speed = 650 to 8500 RPM - Greater than 100 engine revolutions
• Mass Air Flow Per Cylinder = 40 to 2000 mg
• Engine Coolant Temperature = Warmer than -40°C (-40°F)
• Intake Air Temperature = Warmer than -40°C (-40°F)

Frequency the DTC runs = Continuously - After the running conditions are met

P0326, P0331 Condition 1

• Engine = Running
• Engine Coolant Temperature = Warmer than -40°C (-40°F)
• Intake Air Temperature = Warmer than -40°C (-40°F)
• Engine Speed = Greater than 2100 RPM Less than 8501 RPM
• Mass Air Flow Per Cylinder = 0 to 2000 mg

Condition 2 Fuel Economy Mode

• Engine = Running
• Intake Air Temperature = Warmer than -40°C (-40°F)
• Engine Speed = Greater than 2250 RPM
• Mass Air Flow Per Cylinder = Greater than 2000 mg
• Engine Speed = Greater than 8500 RPM - Cumulative = Greater than 421 engine revolutions

Frequency the DTC runs = Continuously - After the running conditions are met

P0327, P0328, P0332, P0333 

Engine Speed = Less than 8500 RPM

Frequency the DTC runs = Continuously - After the running conditions are met

P06B6, P06B7

• Engine = Running
• Engine Speed = 650 to 4750 RPM - Greater than 250 engine revolutions
• Mass Air Flow Per Cylinder = 10 to 2000 mg

Frequency the DTC runs = Continuously - After the running conditions are met