Conditions for Running the DTC

DTC P02EE, P02EF, P02F0, P02F1, P10A3, P10A4, P10A5, P10A6, P10A7, P10A8, P10A9, P10AA, P2B00, P2B01, P2B02, P2B03, P2B08, P2B09, P2B0A, P2B0B 

• Injector Control Performance - Voltage Out of Range
• DTCs run continuously when the above conditions are met.

DTC P2B95, P2B96, P30D4 

• Cold Start Fuel Injector - Injector Control Performance - Voltage Out of Range
• ECT Sensor - -12 to 66°C (10.4 to 151°F)
• BARO Sensor - Greater than 72 kPa (10.44 PSI)
• Engine Speed - 300 to 2600 RPM
• Throttle Position - Less than 1%

DTCs run continuously when the above conditions are met.