Conditions for Running the DTC

• DTC P00C0, P00C1, P00C2, P0033, P0034, P0035, P0101, P010B, P010C, P010D, P0102, P0103, P0106, P0107, P0108, P0111, P0112, P0113, P0114, P0116, P0117, P0118, P0119, P0128, P0236, P0243, P0245, P0246, P0247, P0249, P0250, P103A, P1038, P10BD, P10BE, P111E, P14B6, P2227, P2228, P2229, P2230, P2AB8, P2AB9, P2ABB, P2ABC, P2B81, P2B82, P2B93, P2B94, U060F, U0644, U0674, U1346, U2011 = Not set
• Barometric Pressure Sensor = 60 to 100 kPa (8.7 to 14.5 PSI)
• Desired Engine Torque = 230 to 250 Nm (170 to 184 lb ft)
• Engine Coolant Temperature Sensor = -40 to 150°C (-40 to 302°F)
• Engine Speed = 1500 to 7000 RPM
• Ignition Voltage = Greater than 11 V
• Turbocharger Boost Control Command = Stable
• Turbocharger Wastegate Position Sensor = 20 to 100%

Frequency the DTC runs = Continuously - After the running conditions are met