Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0182, P0183, P0187, P0188
- DTC P128F, P16E4, P16E5 = Not set
- P126E, P128C = Not pending
P0191
- Fuel Rail Pressure Sensor 1 Internal Performance Fuel Rail Pressure Sensor 2 Performance
- Command State = Steady State
- Engine Running
Frequency the DTC runs = Continuously - After the running conditions are met
P0192, P127C
- Fuel Rail Pressure Sensor 1 & Fuel Rail Pressure Sensor 2 = Internal - Error
- Ignition = On
Frequency the DTC runs = Continuously - After the running conditions are met
P111F
- DTC P0182, P0183, P0187, P0188, P126E, P126F, P128C, P128D, P16E4, P16E5 = Not set
- P128C, P128D, P16E5 = Not pending
P126E, P126F
- DTC P128C, P16E4, P16E5 = Not set
- DTC P128C = Not pending
- Ignition = On
P128A, P128B, U0625, U0670, U0671, U101B
- DTC P128F, P16E4, P16E5 = Not set
- Ignition On
Frequency the DTC runs = Continuously - After the running conditions are met
Frequency the DTC runs = Continuously - After the running conditions are met