Conditions for Running the DTC

• DTCs related to the following system/component = Not Set
  • B17 Barometric Pressure Sensor
  • B52 Heated Oxygen Sensor
  • B74 Manifold Absolute Pressure Sensor
  • B75B Mass Air Flow/Intake Air Temperature Sensor
  • B198 Fuel Composition Sensor
  • Q12 Evaporative Emission Canister Purge Solenoid Valve
  • Q17 Fuel Injector
  • Q38 Throttle Body
  • Engine Misfire
• Barometric Pressure = Greater than 70 kPa (10.2 PSI)
• Engine Coolant Temperature = -20 to 130°C (-4 to 266°F)
• Engine Speed = 400 to 6500 RPM
• Fuel Control Loop Status = Closed Loop
• Fuel level = Greater than 10%
• Intake Air Temperature = -20 to 150°C (-4 to 302°F)
• Manifold Absolute Pressure = 18 to 255 kPa (2.6 to 37 PSI)
• Mass Air Flow = 1 to 1000 g/s
• Scan Tool Device Control: = Inactive

Frequency the DTC runs = Continuously - After the running conditions are met