Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0102, P0103
- Battery Voltage = Greater than 8.5 V
- Engine = Running - For greater than 1 s
- Engine Speed = Greater than 300 RPM
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 1 s
U060F
- DTC P14B6, U060F, U1346, U2011 = Not set
- DTC P14B6, U060F, U1346, U2011 = Not pending
- Battery Voltage = Greater than 11 V
- Ignition Power Relay = On
- LIN Bus = Enabled
Frequency the DTC runs = Continuously - After the running conditions are met - For greater than 3 s