Conditions for Running the DTC
WARNING: This page is about a different variant/trim than selected.
P0097, P0098, P0099, P00F4, P00F5, P00F6
- DTC P1682, P16A7, P16BC = Not set
- Ignition = On
- Ignition Voltage = Greater than 11 V
Frequency the DTC runs = Continuously After the running conditions are met
P0112, P0113, P0114
- DTC P14B6, U060F, U1346, U2011 = Not set & Not pending
- Ignition = On
- Ignition Voltage = Greater than 8.5 V
Frequency the DTC runs = Continuously - After the running conditions are met