Installation Procedure
WARNING: This page is about a different variant/trim than selected.
 Courtesy of GENERAL MOTORS COMPANY
|
Turbocharger Oil Feed Pipe Gasket (1, 2, 3) - Install NEW [3x]
- Turbocharger Oil Feed Pipe (4) - Install
 Courtesy of GENERAL MOTORS COMPANY
|
Turbocharger Oil Feed Pipe Bolt (1, 2, 3) - Install and hand tighten [6x]
- Turbocharger Oil Feed Pipe Bolt (1, 2, 3) - Tighten [6x] 8.5 N.m (75 lb in)