LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer RS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L (LSY)) >> Repair Instructions >> Oil Level Indicator Tube Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different variant/trim than selected.
  1. GM5719662Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator Tube O-Ring (2) - Install NEW

  2. Raise and support the vehicle. Lifting and Jacking the Vehicle
  3. Oil Level Indicator Tube (1) - Install
  4. GM5085952Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Oil Level Indicator Tube Bracket Bolt (1) - Install and tighten 8.5 N.m (75 lb in)

  5. GM5085951Courtesy of GENERAL MOTORS COMPANY

    Oil Level Indicator (1) - Install