LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer RS, FWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Engine Mechanical - 2.0L (LSY)) >> Repair Instructions >> Crankshaft and Bearing Removal and Installation >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Clean the crankshaft with solvent.
  2. Thoroughly clean all oil passages and inspect for restrictions or burrs.
    3. WARNING:

    Wear safety glasses when using compressed air in order to prevent eye injury.

  3. Dry the crankshaft with compressed air.
scientia non olet · About LEMON Manuals