1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (2 of 2) Disassemble
1-Reverse and 1-2-3-4-5-6 Clutch Piston Housing (2 of 2) Disassemble
| Callout | Component Name |
|---|---|
| 1 | 1-2-3-4-5-6 Clutch Spring Retaining Ring |
| 2 | 1-2-3-4-5-6 Clutch Piston Return Spring |
| 3 | 1-2-3-4-5-6 Clutch Piston Procedure Blow air in port to help release the piston from the housing. |
| 4 | 1-2-3-4-5-6 Clutch Piston Inner Seal Procedure Remove and DISCARD the seal. |
| 5 | 1-2-3-4-5-6 Clutch Piston Seal Procedure Remove and DISCARD the seal. |