Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Liftgate Hinge Bolt (1) - Install and tighten [4x] 22 N.m (16 lb ft)
With the aid of an assistant, install the liftgate (2).
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Refer to the procedure link for torque specification.

Liftgate Hinge Nut (1) - Install and tighten [2x] - Liftgate Hinge Replacement
Courtesy of GENERAL MOTORS COMPANY

Liftgate Strut (1) - Install - Liftgate Strut Replacement
Courtesy of GENERAL MOTORS COMPANY

Liftgate Power Assist Actuator (1) - Install - Liftgate Power Assist Actuator Replacement
Connect all electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Liftgate Upper Center Trim Finish Panel (1) - Install - Liftgate Upper Center Trim Finish Panel Replacement
Install the rear of the headlining trim panel. Headlining Trim Panel Replacement (With C3U) , or Headlining Trim Panel Replacement (Without C3U)