Installation Procedure
Attach the mechanics wire to the new hood primary latch release cable (2) and guide the cable in.
- Install the hood primary latch release cable grommet (1) to the dash panel.
Attach the hood primary latch release cable end retainer (1) to the inside handle.
Attach the hood primary latch release cable (1) to the retainer (2).
Attach the hood primary latch release cable (2) to the retainer (1).
Attach the hood primary latch release cable end retainer (1) to the latch.
- Install the hood primary latch release cable to the retainer (2).
- Install the appropriate intake air splash shield:
- For LGX engine refer to Intake Air Splash Shield Replacement .
- For LCV engine refer to Intake Air Splash Shield Replacement .