Installation Procedure

Courtesy of GENERAL MOTORS COMPANY

Apply Structural foam 3M™ NVH Dampening Material or equivalent to the front compartment side rail baffle (1).
Courtesy of GENERAL MOTORS COMPANY

Front Fender (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Fender Bolt (1) - Install and tighten [2x] 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Fender Bolt (1) - Install and tighten 9 N.m (80 lb in)
Front Fender Bolt (2) - Tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Fender Bolt (1) - Install and tighten [4x] 9 N.m (80 lb in)
Front Fender Nut (2) - Install and tighten 9 N.m (80 lb in)
Front Bumper Fascia Guide - Install - Front Bumper Fascia Guide Replacement
Courtesy of GENERAL MOTORS COMPANY

Daytime Running Lamp Bolt (1) - Install [2x] - Daytime Running Lamp Replacement
Front Bumper Fascia - Install - Front Bumper Fascia Removal and Installation
Courtesy of GENERAL MOTORS COMPANY

Body Side Upper Front Applique (2) - Install - Body Side Upper Front Applique Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Fender Insulator (2) - Install - Front Fender Insulator Replacement
Courtesy of GENERAL MOTORS COMPANY

Hood Rear Outer Air Inlet Seal (2) - Install - Hood Rear Outer Air Inlet Seal Replacement
Install the front wheelhouse liner. Front Wheelhouse Liner Replacement
Front Wheel Opening Molding - Install - Front Wheel Opening Molding Replacement