Removal Procedure
Front Side Door (4) - Remove - Front Side Door Replacement
Instrument Panel Upper Trim Panel (1) - Remove - Instrument Panel Upper Trim Panel Replacement
- Brake and Accelerator Pedal Assembly - Remove - Brake and Accelerator Pedal Assembly Replacement (without JEO) , or Brake and Accelerator Pedal Assembly Replacement (with JEO)
Windshield Wiper Transmission (2) - Remove - Windshield Wiper Transmission Replacement
- Heater and Air Conditioning Evaporator and Blower Module Nut - Loosen - Heater and Air Conditioning Evaporator and Blower Module Removal and Installation
Windshield Defroster Duct (1) - Remove - Windshield Defroster Duct Replacement
Instrument Panel Outer Air Outlet Duct - Left Side (1) - Remove - Instrument Panel Outer Air Outlet Duct Replacement - Left Side
Instrument Panel Center Air Outlet Duct-Left Side (2) - Remove - Instrument Panel Center Air Outlet Duct Replacement - Left Side
Instrument Panel Outer Air Outlet Duct - Right Side (1) - Remove - Instrument Panel Outer Air Outlet Duct Replacement - Right Side
Instrument Panel Center Air Outlet Duct-Right Side (2) - Remove - Instrument Panel Center Air Outlet Duct Replacement - Right Side
Communication Interface Module Bracket (2) - Remove - Communication Interface Module Bracket Replacement
Radio Bracket (3) - Remove - Radio Bracket Replacement
Antenna Coaxial Cable - Instrument Panel (1) - Remove - Antenna Coaxial Cable Replacement - Instrument Panel
Instrument Panel Tie Bar Bolt (1) - Remove
Instrument Panel Tie Bar Bolt (1) - Remove [2x]
Instrument Panel Tie Bar Bolt (1) - Remove [2x]
Heater and Air Conditioning Evaporator and Blower Module Bolt (1) - Remove [4x]
Instrument Panel Tie Bar Brace (2) - Remove - Instrument Panel Tie Bar Brace Replacement
Instrument Panel Tie Bar Bolt (1) - Remove [2x]
- Note the location and routing of the instrument panel wiring harness prior to removal to ensure proper installation.
- Support the HVAC module in order to prevent damage.
- With the aid of an assistant, remove the instrument panel tie bar assembly from the vehicle. (2)
- Transfer components as necessary.