LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2021 >> Blazer L >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - 9T50 (M3D), 9T60 (M3T) Or 9T65 (M3V) - Repair Instructions - On Vehicle >> Repair Instructions - On Vehicle >> Automatic Transmission Range Selector Lever Cable Lever Replacement >> Removal Procedure

Removal Procedure

  1. Set the park brake and chock the wheels.
  2. GM5042394Courtesy of GENERAL MOTORS COMPANY

    Remove the automatic transmission range selector lever cable retaining bolt (3).

  3. Slide the lock ring (1) forward, then raise the lock tab (2).
  4. Disconnect the automatic transmission range selector lever cable (4) from the automatic transmission range selector lever cable lever.
  5. GM5043056Courtesy of GENERAL MOTORS COMPANY
    WARNING:

    Hold the transmission range selector lever while removing or installing the lever retaining nut. Failure to hold the lever can cause damage to the transmission internal park system components which could allow the vehicle to roll when placed in the park position.

    Remove the automatic transmission range selector lever cable lever nut (1).

  6. Remove the automatic transmission range selector lever cable lever (2).
scientia non olet · About LEMON Manuals