Diagnostic Fault Information
NOTE:
- DTC P0746 will set with a hydraulic/mechanical condition or high resistance in the circuit of the component Q77A without setting component/control circuit DTCs.
- DTC P0747 will set with a hydraulic/mechanical condition.
- The components are listed from the least to the most intrusive to service.
- Verify the conditions listed in the table do not exist
| Component | DTC | Condition |
|---|---|---|
| Q77A Transmission Control Solenoid Valve 1 | P0746, P0747 |
|
|
P0746, P0747 |
|
|
P0746, P0747 |
|
| 1-2-3-4-5-6 Clutch Assembly - Oil Feed Circuit | P0746, P0747 |
|
| 1-2-3-4-5-6 Clutch Assembly | P0746, P0747 |
|