K29 Seat Heating Control Module X3 (KA1)
WARNING: This page is about a different car, the 2020 Buick Encore. However, it is still accessible from the selected car via links, so may be relevant.
Connector Part Information
|
Terminal Part Information
| Terminal Type ID | Terminated Lead | Diagnostic Test Probe | Terminal Removal Tool | Service Terminal | Tray Name | Core Crimp | Insulation Crimp |
|---|---|---|---|---|---|---|---|
| I | Not Required | J-35616-64B (LT BU) | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| II | Not Required | Not Available | No Tool Required | Not Required | Not Required | Not Required | Not Required |
| Pin | Size | Color | Circuit | Function | Terminal Type ID | Option |
|---|---|---|---|---|---|---|
| 1 - 2 | - | - | - | Not Occupied | - | - |
| 3 | - 0.5 |
YE/GY YE/GY |
2079 2079 |
Driver Seat Heating Temperature Sensor Signal Driver Seat Heating Temperature Sensor Signal |
II I |
- KA1 |
| 4 | - 0.5 |
WH/GY WH/GY |
2434 2434 |
Passenger Seat Heating Temperature Sensor Signal Passenger Seat Heating Temperature Sensor Signal |
II I |
- KA1 |
| 5 - 10 | - | - | - | Not Occupied | - | - |
| 11 | - 0.35 |
GN GN |
5060 5060 |
Low Speed GMLAN Serial Data Low Speed GMLAN Serial Data |
II I |
- KA1 |
| 12 | - | - | - | Not Occupied | - | - |