Removal Procedure
Refer to Brake Fluid Irritant Warning .
- Remove the battery. Refer to Battery Replacement .
Disconnect the left rear intermediate pipe fitting (1) from the brake pressure modulator valve (BPMV).
- Plug the BPMV outlet port to prevent brake fluid loss and contamination.
Release the left rear intermediate pipe from the retaining clips (1).
- Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
Release the left rear intermediate pipe from the retaining clip (1).
Release the left rear intermediate pipe from the front floor retaining clips (1).
Remove the 2 nuts and the underbody cross sill shield (1).
- Remove the fuel tank. Refer to Fuel Tank Replacement (AWD) , and Fuel Tank Replacement .
Release the left rear intermediate pipe from the rear floor retaining clips (1).
Release the left rear intermediate pipe from the retaining clips (1).
Release the left rear intermediate pipe from the cross vehicle retaining clips (1).
Release the left rear intermediate pipe from the left rail retaining clips (1).
Release the left rear intermediate pipe from the left rear rail retaining clips (1).
Disconnect the left rear intermediate pipe fitting (1) from the rear brake hose fitting.
- Cap the brake hose fitting to prevent brake fluid loss and contamination.
- Remove the left rear intermediate pipe from the vehicle.