LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Trax LS, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Vacuum Hose Replacement (2H0) >> Removal Procedure

Removal Procedure

  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. GM4082699Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Access the power brake booster vacuum hose quick connect fitting through the left front wheelhouse.

    Quick Connect Fitting (1) - Disconnect

  3. Lower the vehicle.
  4. Disconnect the power brake booster vacuum sensor electrical connector.
  5. GM4082703Courtesy of GENERAL MOTORS COMPANY

    Power Brake Booster Vacuum Sensor (1) - Remove

  6. GM4082708Courtesy of GENERAL MOTORS COMPANY

    Quick Connect Fitting (1) - Disconnect

  7. Power Brake Booster Vacuum Hose - Remove
scientia non olet · About LEMON Manuals