LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Trax LS, FWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Hydraulic Brakes >> Repair Instructions >> Power Brake Booster Vacuum Hose Replacement (2H0) >> Installation Procedure

Installation Procedure

  1. Power Brake Booster Vacuum Hose - Install
  2. GM4082708Courtesy of GENERAL MOTORS COMPANY

    Quick Connect Fitting (1) - Connect

  3. GM4082703Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    A small amount of denatured alcohol may be used as a lubricant for assembly.

    Power Brake Booster Vacuum Sensor (1) - Install

  4. Connect the electrical connector.
  5. Raise and support the vehicle. Lifting and Jacking the Vehicle
  6. GM4082699Courtesy of GENERAL MOTORS COMPANY

    Quick Connect Fitting (1) - Connect

scientia non olet · About LEMON Manuals